Read This If you Are Considering Concrete Wet Cutting

Is it best to cut concrete using the wet or dry method? If you aren’t sure which method is best, please continue reading below.

When cutting concrete, it is possible to do so while using dry and wet cutting methods. While most have heard of the former, the latter is a much better choice.

Here are 6 pointers to keep in mind while using water to cut concrete.

1. Controlling Dust

In case you were unaware, harmful silica dust is released into the air when concrete is being cut.

While there is no way to eliminate this completely, you can significantly reduce the amount you are exposed to by using wet cutting methods.

There has been research conducted and it has shown that using water reduces dust by as much as 85%.

This means that it will have less opportunity to become airborne and settle on various surfaces or worse still, being inhaled.

2. Cooling Saw Blades

When you are sawing through concrete, it is common for the blades of the saw to become rather hot.

Not only can this have an effect on the precision of the cuts, but it can be dangerous to the person doing the cutting.

One of the main reasons for this is the fact that a blade that has become too hot has the possibility of breaking during the cutting process.

Flying blades can harm the one who is doing the cutting as well as anyone who is unfortunate enough to be in close range.

The way in which water helps with the precision of the cut is actually quite simple. When blades get overly hot, it is common for people to take frequent breaks to allow it to cool down.

As a result, they lose their rhythm and end up making cuts that are not consistent with others.

3. It Is Messy

One thing that cannot be disputed is the fact that wet cutting is far messier than its dry counterpart.

While you may not have to worry about all type of dust particles in the air, it will be necessary to prepare to clean a large mess once you are done with your cutting project.

In many cases, people use old fabric as a dropcloth when they are using wet cutting methods. This will make it much easier to clean up after yourself once the project is complete.

4. Experience Needed

If you are someone who does not have a great deal of experience, it may be in your best interest to hire a professional for this task.

While you can probably save a good amount of money by attempting this on your own, this is a huge risk that you should not be willing to take.

To be on the safe side, you should hire a professional to get the job done.

While you will have to pay for this service, it is a small price to pay in exchange for the fact that you will not be hurt while trying to handle a task that is beyond your capabilities.

5. Less Taxing

Wet saws are different from dry ones because they are not meant to be held in the hand while getting the job done.

This means that there is less stress and strain on the person who is doing all of the cutting.

If you are in a position where you are required to cut concrete for a large part of the day, this can make things more bearable.

Now that you know more about wet cutting, it is your responsibility to determine whether this is something that will help you when trying to cut concrete.

If so, then you need to consider all of these points if you want are interested in less mess, more safety and increased precision.

The best way to cut concrete indoors is to hire a professional concrete cutting service.

With dozens of concrete cutting services operating in Melbourne, choosing the right service for your project may not be easy.

There are many things to consider when choosing a reputable and experienced concrete cutting service.

If you are looking for a specialist concrete cutting company who uses only the best practices to get the job done right, then please call us at Megasaw on 1300 920 419 or contact us through our website