What Is the Max Depth Concrete Can Be Saw-Cut?

Diamond chainsaws and cut-off machines are the two most popular concrete cutting tools used in the construction industry.

Hand sawing is a traditional concrete cutting method, but it takes a lot of time and effort. Plus, the depth of the cut is not often satisfactory.

Following are some techniques that can saw-cut concrete to a significant depth:

1.Cut-off Machines

This is the industry standard machine when it comes to saw cutting concrete. These hand-held saws can cut concrete, metal, and asphalt.

A diamond blade or abrasive resin wheel is used in this machine to cut concrete.

You can improve the efficiency of the machine by installing an electric motor or air compressor, hydraulic power unit, or a two-stroke gas engine.

They can cut through 12 to 14-inches of concrete.

It is wise to use a strong power source for cut-off machines to increase their speed. They also become simpler to use and are less noisy.

This is even more so if the main focus is on the depth of the cut as opposed to the noise created when in an enclosed environment.

This is where cut-off machines achieve the best results.

2.Hydraulic Saws

Hydraulic saws offer the maximum power to weight ratio. Moreover, they are convenient to use. One small drawback of this machine is its cost.

Hydraulic saws can be expensive. You may find it more cost effective to hire a company that offers hydraulic saw cutting of concrete.

The way these saws work is by building up pressure in the hydraulic line which then, in turn, helps to produce an accurate cut.

They operate faster than cut-off machines, and you can use them both in enclosed and outdoor environments.

Hydraulic saws are often used to cut huge concrete slabs or cut through walls that are more than 14-inches thick.

3.Diamond Chainsaws

Diamond chainsaws resemble a wood-cutting chainsaw, but they come with a chain, guide bar, and a power head.

As the name suggests, the diamond chainsaw primarily has diamond segments laser welded into the traditional circular blade.

They create a grinding action that cuts the concrete.

This is one of the safest concrete cutting methods you can use as there is no chance of kickback from the chain.

These concrete cutting saws have several benefits over the other two methods.

This machine goes nose first into the concrete and cuts more than twice of what cut-off machines can perform.

So, if there is a requirement to cut a concrete slab of more than 28 inches thick, you can use a diamond chainsaw to the best effect.

There are also gas saws that can cut concrete, but their depth is only limited to 10 inches.

Some of them may reach 12 inches, but it will be wise to either use a diamond chainsaw or a hydraulic saw for a deeper cut.

Those who don’t want to invest in buying a concrete cutting machine can opt for the services of a company that uses the latest tools and saws.

If you are looking for a specialist concrete cutting company who uses only the best tools and equipment to get the job done right, then please call us at Megasaw on 1300 920 419 or contact us through our website: https://www.megasaw.com.au/contact-us/

What Is the Purpose of Saw-cutting Asphalt or Concrete?

Asphalt or concrete has to be handled properly in order to maximise results.

This is why saw-cutting has become a highly anticipated solution among professionals and is well-regarded as the way to go.

It offers a number of advantages and is often the best solution. Following is more about the purpose of saw-cutting asphalt or concrete.

Improved Precision

It begins with the overall precision of saw-cutting because of how it’s done. The tools will go through the material fairly precisely without wavering left or right.

This can ensure the material isn’t wasted and money is saved over the long-term.

Most other methods end up leading to excessive waste, which is never a good thing when you’re on a budget.

Further to this, the precision cut can be a good way to get a nice clean result.

In many cases, the material is going to be used in a specific manner and it has to look the part.

A precise saw-cutting technique can go a long way towards achieving superior results.

Faster

Time is money and that certainly applies here too. With the material being appropriately managed by a professional, it’s important to get it right the first time.

Saw-cutting is an accurate way to handle asphalt or concrete, which is why it is the fastest solution for individuals to consider.

It works well and will lead to the results you are after.

Trusting this option is ideal for anyone that is serious about maximising their resources and wants to control how everything unfolds.

It truly eliminates the type of errors that would otherwise be commonplace with asphalt or concrete.

Easier to Customise

Most modern projects will require some form of personalisation when it comes to the management of asphalt or concrete.

It’s important to look into the realities of this process because it’s not always as easy as one may think.

By saw-cutting the material, it becomes much easier to get a professional looking result.

This saves time and is far better for the project depending on how the material is going to be used.

Improved Finishing

Saw-cutting allows for more control and that also means improved finishing.

Since the material being handled is robust in nature, it’s going to take a bit of work to manage, which is why most people prefer professional cutting solutions.

A lot of time can be wasted using other methods and that’s why most people lean towards saw-cutting their asphalt or concrete.

It’s easier and simply looks better in the long-run.

These are the advantages of saw-cutting and why it is the way to go for those who are serious about what they’re doing.

Having a professional service maximise the materials can lead to improved results in a matter of minutes.

If you are looking for a specialist concrete cutting company who uses only the best tools and equipment to get the job done right, then please call us at Megasaw on 1300 920 419 or contact us through our website: https://www.megasaw.com.au/contact-us/

What is a Ring Saw Used For?

Ring saws are cutting tools which are typically used to cut into concrete or for making cuts into brick walls for windows or doors, for example.

They are particularly useful for confined spaces and for areas that are hard to reach.

Ring saws are one of the more underestimated tools in the average work van, despite the fact they are extremely versatile and sport a number of benefits.

When to Use Ring Saws

Ring saws are a handheld saw, and this means that they can be used to cut areas that you wouldn’t be able to reach with a bigger saw.

Ring saws can cut to depths of up to 150mm and can cut through very hard materials. They also offer a good degree of precision.

You can use a ring saw to cut the following[1]:

– Stone

– Concrete

– Marble

– Glass

– Granite

If you need to insert a window, a new door frame, or a small space for a vent, then a ring saw is the best option.

Improved Safety

Ring saws are powerful but they are also safer than bigger saws and are less likely to cause serious injuries.

One of the reasons for this is the blade of a ring saw doesn’t have teeth. Instead, the blade has abrasive bumps.

This means that even though human skin will still be damaged by accidental contact, the damage is less severe than a blade that has teeth.

Longer Lasting

Another benefit of ring saws is that the saw operates by spinning, rather than vibrating.

This means that the saw will not wear out as quickly, and it also means that the cuts are cleaner.

A vibrating concrete cutter can cause damage to more delicate materials, but a spinning saw gives a smoother and cleaner cut.

Since ring saws are handheld, they are easy to work with, and they are a good choice if you want to avoid accidental overcuts[2].

Choosing a Blade

There are a few different kinds of blades for ring saws, and it’s important to choose the right one for the job.

Abrasive blades are good for precise cuts, but they can kick up plumes of dust. They also tend to get very hot.

If you are doing jobs that may last for a while, then you might want to look at a different type of blade to avoid this issue.

Wet cutting blades are fast and clean. They rely on water to cool the blade and to keep the area being cut dust-free.

Wet-cutting blades cut quickly and are nicer to use because you don’t have to worry about inhaling any of the concrete dust while cutting[3].  

Unfortunately, you need a special saw to use this kind of blade.  

However, if you are doing just one big job, then you could save a lot of money by renting a saw or hiring an expert company to do this on your behalf.

The best blades for ring saws are diamond blades. These have large numbers of small diamonds glued to the blade.

Diamonds are very strong and sharp and can cut through a variety of hard materials with ease.

If a diamond saw blade is not cutting, then it’s most likely that the material you are working with is too soft.

If you are working on lots of smaller projects, a ring saw is the best choice because it is affordable, practical, and precise.

Ring saws can handle difficult materials, including very thick concrete, and can be used in areas where you normally wouldn’t be able to reach with a chain saw.

If you are looking for a specialist concrete cutting company who uses only the best practices to get the job done right, then please call us at Megasaw  on 1300 920 419 or contact us through our website https://www.megasaw.com.au/contact-us/

Saw Cutting Concrete Requires More Than Just An Eye On Safety

Modern engineering produces amazing results.  You can see these on the roads, the homes and buildings, the utility poles, and the vehicles going to and from your community. These are all products of people’s efforts and the tools in their hands.

bioluminescent bridge

Even though most will not know how these are built, the beauty of it is that consumers don’t really need to know that.

But behind the mystery and marvel, those in the know of the concrete saw cutting, understand that architecture and structural engineering still boil down to basics like people using hammers and nails and doing cutting with the use of a saw to come up with the needed materials.

The use of saw to cut is typically associated with nature and with sawing wood for campfires, make-shift shelters, walking sticks, concrete and shelters.

concrete saw cutting

But besides these, saw cutting is a must in several industries. For instance, there is metal saw cutting which is done from the framing of vehicles and automobiles to creating the mesh rebar that is used in the paving of many roads.

Concrete Saw Cutting

Concrete saw cutting is also done to deconstruct things. Law enforcement agents sometimes need to cut through fences or even vehicles. Power saw cutting is used to get past locks of rental storage units so that the abandoned goods inside can be taken and auctioned off.

RELATED: What is Concrete Cutting?

But no matter the purpose, remember that using a saw is dangerous. If used improperly, it can damage what is being cut and hurt or even kill people. Safety goggles are a must with any power saw, and the person handling the saw must have the proper training.

RELATED: Tips on Safe and Efficient Concrete Cutting

Given the risks, a person must know how to use the saw safely. Good thing that this skill, coupled with experience can be useful and profitable.

Note that working with concrete is an art form and there’s definitely a market for concrete furniture,  carvings, and other products.

Besides this, you’ll also have employment opportunities in the construction industry, particularly if you know how to saw cutting a concrete.

RELATED: Detailed Concrete Cutting Pros and Cons

A New Invention: Solar Powered, Glow in the Dark Cement

 

When scientist José Carlos Rubio came up with glowing cement – cement that glows at night, no doubt he intended it to illuminate roads and highways at night.

Ever wondered what it would feel like to ride at nght on a road that does not have the characteristic marginal broken white lines? These will make driving at night quite a breeze.

They provide the needed assist on narrow roads and in remote parts of town where roads are dimly lit or are outright dark.

Imagine not having to rely on traffic lights or your own vehicle’s headlights to see the road.

bioluminscent natural lightning
© cnn.com

Photoactive materials to normal cement  

Mexican scientist Rubio Avalos altered the fine structure of cement over a period of nine years and came up with the variety that could glow in the dark. This breakthrough involved adding photoactive materials to the normal cement. This made it absorb and emit light.

It came with the pressing challenge of finding a way to turn the characteristically opaque material, cement, into something that could soak up UV rays and light up.

At the end, he was able to alter the microstructure of cement – starting by mixing the cement powder with water to make a gel-like material. The gel formed makes the material form crystals.

The crystals are then removed to form Rubio Avalos’ glowing concrete. The resulting material allows sunlight to penetrate and be retained within the cement matrix without being reflected.

hands glowing in cement
(C) cnn.com

With its glow-in-the-dark properties being able to last for a minimum of 100 years, and the technology being able to work even on cloudy days, the cement brings about unlimited possibilities.

 

Works indoors too

For starters, the solar powered, glow-in-the-dark cement can work indoors. The cement will draw the glow properties from the little UV rays in the course of the day to use during the night.

glow in the dark cement indoor design
© The Polished Concrete Company

The cement emits either green or blue colours. The light intensity could also be adjusted based on the place where the material is to be used or applied.

Avalos explained that the cement can be charged even indoors or during cloudy days because it’s charging mechanism does not depend on direct sunlight. Plus, the material can emit light continuously for 12 hours before it requires a recharge.

The materials being from dust, clay or sand, with the residue being water steam makes the glowing cement ecologically friendly. These properties make the cement is suitable for both interior and exterior applications.

Given these features, Avalos said that some organizations have already made plans on how to make use of the product.

Médecins Sans Frontières, a non-government organization intends to illuminate bathrooms where there are electricity and lighting problems. With this, they want stop the idea is to reduce the danger that women are potentially exposed to when they enter dark public toilets.

 

Projects that can use this type of cement

There are unlimited uses for glowing cement in the construction industry, among these are:

 

Road construction

A solar-powered cement that glows in the dark and can withstand the harsh effects of the sun’s UV rays for at least 100 years revolutionizes roads.

For one, instead of using floodlights, it is more cost-effective to use solar-powered cement in areas that require minimal street lighting.

glowing cement use in road
© cnn.com

Referred to as solar road, this has already been tested in the Netherlands with stones that charge during the day and glow at night to illuminate a pathway for bikes.

Before, the materials used to illuminate the bike path are made of plastic that easily degrades after a couple of years of exposure to the sun.

In contrast, solar powered cement is durable and can be a relatively permanent solution to road lighting.

 

Decor for Interiors

Rubio’s work is not limited to cement. Since it is applicable for It can also be used in plaster.

glowing pathway
(c) InHabitat

This is especially breathtaking, especially against dark backgrounds. This makes it possible to create luminous wall coatings.

Imagine houses with walls that emit light at night. This can be good for both security and decoration purposes.

Constructing swimming pools that can be safely used at night

Rubio Avalos says governments, businesses, and NGOs have requested that his cement to use to illuminate the inside of swimming pools.

glowing swimming pool
© Rolling Stone Landscapes

With this, you won’t need for alternative lighting and makes night swimming safer.

 

Decorating cities in red, blue and purple

Though the glowing cement is available only in bright green and marine blue colors, Avalos is working to produce varieties that can glow in red, white and purple. When these are realized, we can only expect buildings adorned with the said colors.

Although the solar powered glow-in-the-dark cement is currently battling with issues of cost of production, there’s solid hope that all these expectations will be actualized in the near future.