controlled crack in concrete

Concrete is one of those materials that is guaranteed to crack over time.

With that said, there are some who choose to create intentional cracks instead of sitting around and waiting for trouble to brew.

If you are not familiar with how to do this and you would like a bit more of an insight, it would be best if you continue reading.

Reasons For Controlling The Cracks

One reason that some people try controlling cracks is for aesthetic value.

They like the look of cracked concrete and they do not want to sit around waiting for nature to take its course.

Instead, they crack the concrete on purpose to achieve the desired look.

Another reason is to control the way that the concrete cracks as far as the size of the cracks and the multitude of them.

It is also a wise idea to have some control over where the cracks occur.

For instance, you can ensure the corners and edges of concrete will crack instead of having a large crack down the middle.

Cutting It Yourself

If you are savvy enough, it is possible to complete this task on your own.

It will be necessary for you to do one of two things: You can rent a saw and add some cracks or you can install joints during the finishing process.

If you choose to do the former, you may want to hire a saw from someone else since there is a chance the job will make blades become blunt.

If you lease a machine from elsewhere, that means the sharpening of the blades won’t be your responsibility.

It is crucial that you know where you are cutting since you do not want to cause any structural damage.

If in doubt, you should digress and hand over this responsibility to a professional.

In the event that you decide to install joints, this is a bit more complicated and you will need to be certain that you know what you are doing ahead of time.

Otherwise, you may make things worse than expected.

Hiring A Professional

In the event that you feel this project is beyond your scope, you should not hesitate to reach out for assistance.

While you might believe this shows a lack of skill, it is better than making an error that can not be fixed right away.

When hiring a professional, it is important to do your research in order to ensure you are dealing with the best possible company for the job.

While this is not an inexpensive decision, it is one that you are likely to find is more than worth the investment.

Safety First

Before beginning any construction projects, it is imperative that you know how to keep yourself safe in the process.

These rules apply to those who decide to cut the concrete with a saw:

  • Make sure that the blade is sharp. A dull blade has the potential to be more damaging than you think.
  • Always wear safety goggles. This process will create a lot of dust and you do not want any of it to get into your eyes.
  • Wear a mask so that the amount of silica dust your lungs are exposed to is minimal. This can be extremely dangerous.
  • Never operate equipment while under the influence of drugs, alcohol and certain medications.

This may seem like common sense, but it cannot be stressed enough since it will assure maximum safety.

Whether you want to change the way your concrete looks or your concern is more about saving its integrity, it may be necessary for you to cause intentional cracks.

Hopefully, this guide has given you an understanding of why this is necessary, how to do it and how to keep yourself safe during the process.

If you are looking for a specialist concrete cutting company who uses only the best practices to get the job done right, then please call us at Megasaw  on 1300 920 419 or contact us through our website www.megasaw.com.au/contact-us/